Gilmer, Texas
Mulch installation in Gilmer
Fresh mulch for Gilmer beds, laid at the depth that actually works in East Texas, with clean edges and the weeds pulled first.
- Upshur County, Texas
- Free written estimate within a day
- Same crew every visit, never subcontracted
Who does mulch installation in Gilmer, TX?
Yard Dog Landscapes, a family-owned, fully insured company based in Longview, installs mulch in Gilmer and across Upshur County. We've worked East Texas yards since 2017 and hold a 5.0 rating across 143 Google reviews. We re-cut edges, pull weeds by the root and lay hardwood, cypress, dyed mulch or pine straw 1 to 1.5 inches deep, with no fabric underneath. Most beds run $600 to $2,400. Request a free quote in Gilmer online.
Mulch Installation for Gilmer yards
Mulch does extra work on sandy ground: it slows evaporation and breaks down into the organic matter Gilmer soil is short on. We re-cut the edges, clean out the weeds by hand and lay hardwood 1 to 1.5 inches deep with no fabric under it, or pine straw if you like that look, ideally from late April to mid-May or in October. Most bed refreshes run $600 to $2,400.
A good mulch job is mostly prep. We re-cut the bed edge so grass can't creep in and pull every weed by the root, because mulch hides weeds, it doesn't kill them. Then we loosen the top of the soil so water can reach the roots, and lay the mulch even, 1 to 1.5 inches deep, pulled back off stems and trunks.
What's included
- Bed edges re-cut clean
- Weeds pulled by the root and light bed cleanup
- Top inch of soil loosened before mulching
- Hardwood, cypress, cedar, or dyed black or brown
- Pine straw on request
- Mulch spread even at 1 to 1.5 inches
- Mulch kept off stems and tree trunks
- Spring installs and fall top-dress
How the job goes
The best window is late April through mid-May, right after the spring growth flush and before the heat shows up. The second is late September through October, when a thin top-dress goes down before the leaves drop and the first cold front comes through.
Measure the beds
We walk the beds, measure the square footage and check how much of the old layer is left, so you only pay for what the beds need.
Edge and clean
Edges get re-cut, weeds come out by the root, and thin spots get topped up with soil where needed.
Loosen the soil
We break up the crusted top inch so rain gets down to the roots instead of running off.
Lay the mulch
Mulch goes down 1 to 1.5 inches deep, raked even and tapered off at stems and trunks.
Clean up
We blow off the walks and drive and haul away the debris.
Examples of our mulch installation work
Real jobs by our crew around East Texas. Each photo says where it was taken.
Mulch Installation questions in Gilmer
How deep should mulch be in Gilmer?
About 1 to 1.5 inches of hardwood over a cleaned, edged bed. Deeper mulch sheds light rain and holds moisture against plant stems, which invites rot. In sandy soil, that thinner layer still slows evaporation and breaks down into organic matter the bed needs.
How much does mulch installation cost in Gilmer, TX?
Most mulch and bed refreshes run $600 to $2,400. Where you land depends on how many beds you have, how many yards of mulch they take, the type you pick, and how much edging and weed pulling they need. A fall top-dress over a layer that's still there costs less than a full install. We measure and send a written quote for free.
How deep should mulch be in East Texas?
About 1 to 1.5 inches over a prepped bed. Three inches sheds light rain, holds moisture against stems until they rot, and gives voles cover through the winter. For fresh mulch, divide your bed's square footage by 260 to get yards. A 2,000 square foot bed needs about 8 yards, not the 19 most calculators tell you to buy.
What type of mulch is best for East Texas?
Shredded hardwood is the standard for most beds here. It looks clean and breaks down into soil, which is part of the point. Cypress breaks down slower, cedar holds up well in our heat and humidity, and dyed black or brown gives more contrast. Pine straw works if you like the look. On a refresh, we match what's already in the bed.
More we do in Gilmer
Lawn Maintenance
Gilmer lawns on sandy ground dry out fast, and a low cut makes it worse.
Fertilization
Gilmer's sandy ground does not hold onto fertilizer, so one heavy feeding mostly washes past the roots.
Sod Installation
When a Gilmer lawn has been scalped, burned out or overrun, sod is the clean restart.
Flower Bed Installation
In Gilmer's sand, a new flower bed needs organic matter in it or it will dry out between every rain.
Landscaping
Beds in sandy Gilmer soil drain well, which is good news for heat lovers like lantana, salvia and plumbago and bad news for anything thirsty.
Christmas Lights
Gilmer is an easy run from our shop, so standard light pricing applies, and most homes start at $900.
Leaf Removal
Between the oaks, pecans and pines around Gilmer, fall cleanup is not a one-weekend job.
Hedge Trimming
Country homes around Gilmer often have long hedge lines along a drive or fence, and those take a different approach than a foundation shrub.
Get a free mulch installation quote in Gilmer
Tell us what you need and where. We call within a day, walk the property with you and send a written, itemized estimate. No pressure and no surprise add-ons.
- Free on-site walkthrough
- Written estimate, usually within a day
- Same crew every visit, never subcontracted
- Fully insured, 5.0 on Google from 143 reviews